Close Menu5/8 inch Straight Ball Service Valve, 1/2 inch FNPT Inlet x 1/2 inch FNPT
Features:
Valve is non-directional and is watertight with flow in either direction Ends are integral or secured with adhesive to prevent unintentional disassembly
Hole for attaching handle is provided in tee-head
Sturdy stops allow 90 Deg motion and are enclosed and protected
Stainless steel reinforcing ring molded into seats
3/8 in. 316 Stainless Steel Ball Valve 1000 WOG Full Port Threaded 2-Piece
SHARPE Spec Sheets: Series 50M76 Ball Valves
150 lb. flanged ends
Full port
316 Stainless steel
body and trim
Locking device
Blow-out proof stem
3/4" Sharpe 316 Stainless Steel Ball Valve - Threaded
This is a three-quarter inch Sharpe brand stainless steel ball valve with threaded connections. This quality Sharpe 50M76 valve features a blowout proof stem and locking device on the handle. Able to handle a wide range of temperatures and pressure. 1000 lbs WOG, 150 WSP. Full port body and ball means less to no flow loss.
1" Sharpe 316 Stainless Steel Ball Valve - Threaded
50M76 Sharpe brand stainless steel ball valve with blow out proof stem. Full port design eliminates the risk of major loss of flow. Easy-turn handle for on/off functionality.
Sharpe SV50M76014 316 Stainless Steel, 2-Piece Ball Valve - 1-1/2" NPT
The Sharpe SV50M76014 is a Series 50M76 316 stainless steel ball valve with a 1-1/2" NPT threaded connection, RTFE seat, 2-piece body type, full port port, locking lever handle, and 1,000 PSI max pressure.
SUBMERSIBLE PUMP 4" 1HP 3W 8STG
4" Deep Well, Fits in a 4" well casing, 18.5 MAX GPM (Gallons per minute), 1 HP (Horse Power), 1-1/4" NPT discharge, 133 Feet Max Head is for open Water Tanks, 110 Volt (110V), 4 Stage design.
Patented Impeller design provides extended pump life and heavy flow, under the worst circumstances. Water Temperature: (32 ~ 113 F) Trans Medium Ph: 6.5 ~ 8.5. The Shell and Motor Shaft are made with Stainless Steel to ensure corrosion resistance. High quality sealed ball bearings guarantee its excellent performance.
Hermetically sealed motor has a built in capacitor start and thermal protection to prevent overheating. Built in Control box. This pump DOES NOT require an external control box. Uniquely designed to reduce its noise. Last longer than the all plastic bottom suction pumps, which weigh half as much as this pump (with same HP)
This is a 2 wire pump with 3-wires (2 wires & ground wire). 100' long electric cord comes with this submersible deep well pump. Heavy duty thermoplastic impellers, diffusers and intake screen. This pump also has a built in check valve.
